Escape from Tarkov Ping Fix: How to Stop Getting Kicked for High Ping

Why Escape from Tarkov’s Ping Limit Makes Every Millisecond Critical

Escape from Tarkov enforces a hard ping limit of approximately 150ms, automatically kicking players who exceed this threshold. Unlike other shooters that simply give you a disadvantage, Tarkov will literally disconnect you mid-raid, causing you to lose your gear, progress, and potentially hours of preparation. The game’s complex ballistics system and realistic damage model mean that even a 50ms difference can determine whether your shot registers before an opponent’s, making ping optimization essential for survival.

Tarkov’s Unity engine compounds network issues with memory leaks and stuttering that worsen over extended play sessions. The combination of high ping and engine-related performance drops creates a perfect storm where players experience both network lag and frame drops simultaneously, making it nearly impossible to compete effectively in the game’s unforgiving PvP encounters.

How to Check If You Have a Lag Problem

Open the BSG Launcher and navigate to the server selection screen before launching Tarkov. Click on “Change Server” and uncheck “Use automatic server selection” if it’s enabled. This screen displays your ping to each available server cluster in real-time. Any server showing above 80ms ping should be unchecked immediately. Servers above 120ms will put you at risk of the automatic kick system, while anything above 150ms guarantees disconnection.

In-game, press Tab to open your inventory and look for stuttering or delays when moving items. Network lag in Tarkov manifests as delayed item transfers, late bullet registration, and enemies appearing to “teleport” or move erratically. Enable the FPS counter by pressing Ctrl+T to distinguish between network issues (consistent FPS but delayed responses) and performance problems (low or unstable FPS).

Run a continuous ping test to your selected Tarkov servers while playing. Open Command Prompt and type “ping -t [server IP]” replacing [server IP] with your regional server address. For US East players, this would typically be a server in the 140-160ms range to Virginia or Ohio data centers. Monitor this throughout your raid – if you see ping spikes above 130ms lasting more than 10-15 seconds, expect a disconnection.

Test server stability by running Scav raids on different maps. Streets of Tarkov is the most network-intensive map and will reveal connection issues faster than simpler maps like Factory or Labs. If you experience desync, delayed gunfire registration, or stuttering specifically on Streets but not on other maps, the issue is likely server-side rather than your connection.

Router and Network Configuration Fixes

Port Forwarding for Tarkov Servers

Access your router’s admin panel by typing 192.168.1.1 or 192.168.0.1 into your browser. Navigate to Port Forwarding or NAT settings and create new rules for Escape from Tarkov. Forward TCP ports 80 and 443, plus UDP port 25565 to your gaming PC’s internal IP address. These ports handle Tarkov’s server communication and matchmaking processes. Save the settings and restart your router completely – unplug power for 30 seconds, not just a soft reset.

Set your gaming PC to a static IP address within your router’s DHCP range to ensure port forwarding rules remain consistent. In Windows, go to Settings > Network & Internet > Ethernet > Change adapter options. Right-click your connection, select Properties, then Internet Protocol Version 4. Choose “Use the following IP address” and enter an IP like 192.168.1.100, with subnet mask 255.255.255.0 and your router’s IP as the gateway.

DNS Server Optimization

Replace your ISP’s DNS servers with Cloudflare’s 1.1.1.1 and 1.0.0.1, or Google’s 8.8.8.8 and 8.8.4.4. Open Network Connections in Windows, right-click your active connection, select Properties, then Internet Protocol Version 4. Choose “Use the following DNS server addresses” and enter these values. Cloudflare typically provides 10-20ms faster DNS resolution than ISP servers, reducing the time needed to connect to Tarkov’s matchmaking services.

Flush your DNS cache after making changes by opening Command Prompt as administrator and running “ipconfig /flushdns” followed by “ipconfig /registerdns”. Restart your network adapter by running “ipconfig /release” then “ipconfig /renew”. This forces Windows to use your new DNS settings immediately rather than relying on cached entries from your old DNS servers.

Router Quality of Service (QoS) Configuration

Enable QoS in your router settings and set gaming traffic as highest priority. Look for “Gaming Accelerator,” “Adaptive QoS,” or “Traffic Analyzer” depending on your router model. Set Escape from Tarkov’s executable (EscapeFromTarkov.exe) to highest priority, allocating at least 80% of your upload bandwidth to gaming traffic. Upload bandwidth is critical for Tarkov since player movement, shooting, and inventory actions require constant data transmission to the server.

Configure download bandwidth allocation to reserve 70% for gaming, leaving 30% for background applications. Tarkov downloads map data, player positions, and item states continuously during raids. Set latency optimization to “Gaming” mode if available, which prioritizes small packets (like player position updates) over large downloads that might be running simultaneously.

Ethernet vs Wi-Fi Performance Analysis

Wire your gaming PC directly to your router using Cat 6 or better ethernet cable. Wi-Fi connections to Tarkov servers typically show 15-30ms higher latency than wired connections, plus packet loss during peak usage hours. Run ping tests to your selected Tarkov servers over both connections – “ping -n 100 [server IP]” will send 100 packets and show packet loss percentage. Acceptable packet loss for Tarkov is 0% – even 1% packet loss can cause disconnections or severe desync.

If you must use Wi-Fi, connect to your router’s 5GHz band exclusively and position your PC within 15 feet of the router with minimal walls between. Change your Wi-Fi channel to 149, 153, 157, or 161 to avoid interference from neighboring networks. Use a Wi-Fi analyzer app to identify the least congested channel in your area, as interference can add 20-50ms of latency variability.

MTU Size Optimization

Determine your optimal MTU size by running ping tests with different packet sizes. Open Command Prompt and run “ping -f -l 1464 8.8.8.8” – if this works without fragmentation, your MTU can be set to 1492. If it fails, try “ping -f -l 1436 8.8.8.8” and work down until you find the largest size that works without the “Packet needs to be fragmented” error. Add 28 to this number to get your optimal MTU size.

Set this MTU size in your network adapter properties. Go to Device Manager > Network adapters, right-click your ethernet or Wi-Fi adapter, select Properties > Advanced. Find “Jumbo Packet” or “MTU Size” and set it to your calculated value. Tarkov’s network code is sensitive to packet fragmentation, which occurs when your MTU is too large for your internet connection’s maximum packet size.

ISP Routing Diagnostics

Run traceroute tests to identify routing problems between your ISP and Tarkov servers. Open Command Prompt and run “tracert [Tarkov server IP]” – this shows every network hop between you and the game server. Look for hops with consistently high latency (above 100ms) or timeouts marked with asterisks. If you see routing through geographically distant locations (like East Coast traffic routing through West Coast servers), contact your ISP’s technical support.

Document specific problematic hops with screenshots and timestamps when contacting your ISP. ISPs can often reroute your traffic through better pathways, but they need specific technical information about where the routing problem occurs. Mention that the issue affects your ability to connect to game servers and request escalation to their network engineering team rather than standard customer service.

Related: Game Lag Fix: Every Cause of In-Game Lag Solved for PC and Console

Buffer Bloat Testing and Resolution

Test for buffer bloat using DSLReports Speed Test, which measures latency under load. Run the test and look for “Buffer Bloat” grades – anything worse than A or B will cause lag spikes in Tarkov during high network usage. Buffer bloat occurs when your router queues too many packets during peak usage, creating latency spikes of 100-300ms even when your base ping is low.

Enable SQM (Smart Queue Management) in your router firmware if available, or upgrade to a router that supports it. Set SQM bandwidth to 85% of your actual internet speed – if you have 100Mbps download, set SQM to 85Mbps. This prevents the router from overloading its packet queues and maintains consistent low latency even when other devices are using bandwidth simultaneously.

In-Game Settings Optimization

Server Selection Configuration

Open the BSG Launcher and click “Change Server” in the bottom right. Uncheck “Use automatic server selection” immediately – this setting often connects you to servers with suboptimal routing or high population, resulting in higher ping and more frequent disconnections. Select only servers showing under 60ms ping for optimal performance, or under 80ms if you have limited server options in your region.

For US players, prioritize servers labeled with your closest major cities – Miami, Chicago, New York, Seattle, or Los Angeles depending on your location. European players should select London, Frankfurt, or Amsterdam servers. Avoid selecting servers on different continents even if they show acceptable ping in the launcher, as routing can change throughout the day and push you over the kick threshold during peak hours.

RAM Management Settings

Enable RAM Cleaner in Settings > Game > RAM Cleaner. This setting forces Tarkov to clear memory usage between raids, preventing the Unity engine’s memory leaks from accumulating over long play sessions. Without RAM cleaner enabled, Tarkov can consume 12-16GB of RAM after several raids, causing system-wide performance issues and network stuttering.

Navigate to Settings > Game > Use Physical Cores Only and enable this option if you have a CPU with 6 or more physical cores. This prevents Tarkov from using hyperthreading, which can cause micro-stutters during network-intensive moments like firefights or area transitions. The trade-off is slightly lower maximum FPS in exchange for much more consistent frame times and network responsiveness.

Graphics Settings That Impact Network Performance

Disable PostFX entirely in Settings > Graphics > PostFX. These visual effects add GPU processing overhead without providing competitive advantages, and the additional GPU load can cause system stuttering that affects network packet processing. Players report 5-15ms ping improvements after disabling PostFX due to reduced system resource contention.

Enable MIP Streaming in Settings > Graphics > MIP Streaming if you have less than 8GB of VRAM. This setting streams textures from system RAM instead of storing them entirely in graphics memory, reducing VRAM usage but potentially causing texture pop-in. The network performance benefit comes from reduced memory bandwidth usage, allowing more system resources for network packet processing.

Audio Settings for Network Optimization

Set Audio Quality to Medium in Settings > Sound > Audio Quality. High audio quality in Tarkov requires additional CPU processing for 3D audio calculations, particularly on maps with complex geometry like Streets or Interchange. The CPU cycles saved by using Medium audio quality become available for network packet processing, reducing micro-stutters during intense combat scenarios.

Enable Hardware Audio Acceleration if your sound card or motherboard supports it. This offloads audio processing from the CPU to dedicated audio hardware, freeing CPU resources for game logic and network processing. Check your motherboard manual or sound card specifications to confirm hardware acceleration support before enabling this option.

Field of View and Interface Settings

Set Field of View to 59-63 in Settings > Game > Field of View. Higher FOV values require rendering more geometry and player models, increasing both GPU and CPU load. The additional processing overhead can cause frame time spikes that interfere with consistent network performance. Most professional Tarkov players use 59-62 FOV for optimal performance balance.

Disable Interface elements you don’t actively use in Settings > Game > Interface. Turn off “Show weapon durability,” “Always show exit names,” and other overlay elements that require constant screen updates. Each interface element consumes CPU cycles for rendering and updating, reducing available processing power for network operations.

Game Mode and Performance Settings

Enable V-Sync if you’re experiencing screen tearing, but disable it if your monitor has G-Sync or FreeSync capability. V-Sync can introduce input lag that affects both mouse response and network timing, while adaptive sync technologies provide smooth visuals without the latency penalty. Monitor your frame rate with V-Sync enabled – if you’re dropping below your monitor’s refresh rate frequently, disable V-Sync for better network responsiveness.

Set Texture Quality to Medium or High based on your VRAM capacity. Low texture quality can actually hurt performance on modern GPUs by underutilizing the graphics processor, while Ultra quality may cause VRAM overflow and stuttering. Medium quality provides the best balance for most 6-8GB VRAM graphics cards, while High works well for 10GB+ VRAM cards like the RTX 3080 or better.

Shadow and Lighting Optimization

Set Shadow Quality to Medium and disable “Contact Shadows” in Settings > Graphics. Contact shadows require real-time ray tracing calculations that heavily load the GPU, causing frame time inconsistency that can interfere with network packet timing. The performance gain from disabling contact shadows typically results in 10-20% more consistent frame times.

Reduce Shadow Distance to 70 or lower if you’re experiencing stuttering in outdoor areas. Long shadow distances require the GPU to render shadows for distant objects that don’t affect gameplay, consuming processing power that could be allocated to maintaining consistent network performance. Most competitive players use shadow distance of 40-60 for optimal visibility while maintaining performance.

PC and System Optimization

NVIDIA Graphics Driver Configuration

Open NVIDIA Control Panel and navigate to “Manage 3D Settings.” Create a program-specific profile for EscapeFromTarkov.exe and set “Power Management Mode” to “Prefer Maximum Performance.” This prevents the GPU from downclocking during gameplay, which can cause stuttering when the GPU ramps up during intensive scenes like firefights or area transitions.

Set “Threaded Optimization” to On in the same menu. This allows the NVIDIA driver to use multiple CPU cores for graphics processing, reducing the load on individual cores and freeing processing power for network operations. Enable “Low Latency Mode” and set it to “On” – this reduces the number of frames the GPU pre-renders, decreasing input lag and improving responsiveness to network events.

AMD Graphics Driver Optimization

Open AMD Radeon Software and navigate to Gaming > Global Settings. Enable “Radeon Anti-Lag” which reduces input latency by synchronizing CPU and GPU frame processing more efficiently. This setting can reduce system latency by 10-20ms, improving both mouse responsiveness and network packet timing consistency.

Set “Radeon Boost” to Enabled with a minimum resolution scale of 80%. This feature dynamically reduces rendering resolution during fast movement or high action scenes, maintaining higher frame rates during network-intensive moments like combat. The consistent frame rate helps maintain steady network performance when the game is under high processing load.

Windows Power Plan Configuration

Open Control Panel > Power Options and select “High Performance” power plan. If this option isn’t visible, open Command Prompt as administrator and run “powercfg -duplicatescheme 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c” to enable it. High Performance mode prevents CPU and network adapter power saving features that can introduce latency spikes of 20-50ms when the hardware “wakes up” from power saving states.

Click “Change plan settings” > “Change advanced power settings” for the High Performance plan. Expand “PCI Express” > “Link State Power Management” and set it to “Off.” This prevents your network adapter and other PCIe devices from entering power saving modes that can cause brief disconnections or latency spikes during gameplay.

Process Priority and CPU Affinity

Launch Tarkov and open Task Manager (Ctrl+Shift+Esc). Navigate to the “Details” tab, find EscapeFromTarkov.exe, right-click and select “Set Priority” > “High.” This gives Tarkov preferential CPU scheduling over other applications, ensuring network packets are processed with minimal delay even when other programs are running.

Right-click EscapeFromTarkov.exe again and select “Set Affinity.” If you have an 8-core or higher CPU, uncheck cores 0 and 1, leaving cores 2-7 available for Tarkov. Reserve cores 0 and 1 for Windows system processes and network handling. This prevents the operating system from interrupting Tarkov’s processing during critical network operations.

Windows Game Mode and Game Bar

Open Windows Settings > Gaming > Game Mode and enable Game Mode. Despite mixed reports about Game Mode’s effectiveness, it provides network QoS improvements for identified games like Tarkov by prioritizing network packets from gaming applications over background downloads and updates. Game Mode also prevents Windows Update and other system maintenance tasks from running during gameplay.

Disable Xbox Game Bar in Settings > Gaming > Xbox Game Bar. Turn off “Enable Xbox Game Bar” and all related recording features. Game Bar’s overlay and recording capabilities consume CPU and memory resources continuously, even when not actively recording. The background processes can interfere with network packet processing and cause micro-stutters during gameplay.

Background Application Management

Disable Windows 10/11 delivery optimization by opening Settings > Update & Security > Delivery Optimization and turning off “Allow downloads from other PCs.” This feature uses your internet connection to distribute Windows updates to other computers, consuming upload bandwidth that Tarkov requires for player position and action updates to game servers.

Open Services.msc and disable “Windows Update” service temporarily while gaming. Set the service to “Manual” startup type, then stop the service. Windows Update can consume significant bandwidth downloading patches in the background, causing ping spikes and packet loss during Tarkov raids. Remember to re-enable it periodically for security updates.

Related: Dead by Daylight Lag Fix: How to Stop Freezing Mid-Chase

Related: PUBG High Ping Fix: Every Network Tweak for PC and Console

Related: Palworld Lag Fix: How to Stop Server Lag and Connection Drops

Related: Overwatch 2 Lag Fix: Why Your Ping Is High and How to Drop It

Network Adapter Power Management

Open Device Manager and expand “Network Adapters.” Right-click your primary network adapter and select Properties > Power Management. Uncheck “Allow the computer to turn off this device to save power.” Network adapter power saving can cause brief disconnections or latency spikes when the adapter transitions between power states, which may trigger Tarkov’s kick system.

Navigate to the “Advanced” tab in the same Properties window. Find “Interrupt Moderation” or “Interrupt Throttle Rate” and set it to “Disabled” or “Off.” This setting batches network interrupts to reduce CPU usage, but can add 10-30ms of latency to network packet processing. Disabling interrupt moderation provides more responsive network performance at the cost of slightly higher CPU usage.

Advanced Configuration and Registry Tweaks

BSG Launcher Cache Management

Open the BSG Launcher and click the settings gear icon in the top right corner. Select “Clear Cache” and confirm the operation. The launcher cache can become corrupted after game updates, causing connection issues or incorrect server ping displays. Clear the cache after every major Tarkov update and whenever you experience unexpected connection problems.

Navigate to your BSG Launcher installation directory (typically C:\Users\[Username]\AppData\Roaming\BSGLauncher) and delete the “cache” folder manually if the launcher’s clear cache function doesn’t resolve connection issues. This forces the launcher to rebuild its server list and connection configurations from scratch, often resolving persistent connectivity problems.

Windows TCP/IP Stack Optimization

Open Command Prompt as administrator and run “netsh int tcp show global” to view current TCP settings. Run “netsh int tcp set global autotuninglevel=disabled” to disable TCP window auto-tuning, which can cause latency spikes in some network configurations. Auto-tuning attempts to optimize TCP window sizes automatically but can overcompensate and create large buffers that increase latency.

Execute “netsh int tcp set global chimney=enabled” to enable TCP Chimney Offload if your network adapter supports it. This feature offloads TCP processing to the network adapter’s hardware, reducing CPU usage and improving network response times. Check your adapter’s documentation to confirm Chimney Offload support before enabling this feature.

Registry Network Optimizations

Open Registry Editor (regedit) and navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters. Create a new DWORD value called “TcpAckFrequency” and set it to 1. This forces Windows to acknowledge TCP packets immediately rather than batching acknowledgments, reducing latency for real-time applications like Tarkov.

In the same registry location, create a DWORD value called “TCPNoDelay” and set it to 1. This disables the Nagle algorithm for TCP connections, preventing Windows from bundling small packets together before transmission. While bundling improves efficiency for file transfers, it adds latency to gaming traffic where immediate packet transmission is critical.

Tarkov Configuration File Modifications

Navigate to %USERPROFILE%\Documents\Escape from Tarkov and open the “shared.ini” file with a text editor. Find the line containing “RefreshRate=” and set it to your monitor’s maximum refresh rate. Even if you can’t maintain that frame rate consistently, this setting improves frame timing consistency which helps with network performance.

Locate the “VSync=” line in the same file and set it to “false” if you’re using G-Sync, FreeSync, or want minimum input lag. V-Sync introduces frame buffering that can delay network packet processing by 16-33ms depending on your refresh rate. Save the file and set it to read-only to prevent Tarkov from overwriting your changes.

Windows Firewall and Security Configuration

Add specific firewall exceptions for Tarkov and BattlEye anti-cheat. Open Windows Defender Firewall with Advanced Security and create new inbound and outbound rules for EscapeFromTarkov.exe and BEService.exe. Allow all connections for these programs to prevent Windows from blocking or scanning game traffic, which can introduce latency or cause disconnections.

Navigate to Windows Security > Virus & threat protection > Exclusions and add your entire Tarkov installation directory. Real-time antivirus scanning of game files during gameplay can cause stuttering and interfere with BattlEye’s operation. Adding exclusions prevents Windows Defender from scanning Tarkov’s memory usage and file operations during gameplay.

SSD and Storage Optimization

Ensure Tarkov is installed on an SSD rather than a traditional hard drive. Map loading times on HDDs can exceed 3-5 minutes compared to 30-60 seconds on SSDs. Long loading times can trigger Tarkov’s connection timeout, disconnecting you before you successfully load into raids. Use Windows Storage Sense to verify Tarkov is on your fastest drive.

Enable Write Caching for your Tarkov SSD in Device Manager > Disk drives. Right-click your SSD, select Properties > Policies, and check “Enable write caching on the device.” This improves performance for Tarkov’s constant cache file updates and temporary file operations, reducing system stuttering that can affect network performance during intensive scenes.

Hardware-Specific Optimizations

RAM Configuration and Timing

Verify your RAM is running at its rated speed using CPU-Z or similar monitoring software. Many systems default to JEDEC speeds (2133-2666MHz) rather than the RAM’s XMP/DOCP profile speeds. Enable XMP in your BIOS to ensure your RAM runs at its rated speed – Tarkov benefits significantly from faster RAM due to its large memory usage and Unity engine requirements.

If you have 16GB or less RAM, close all unnecessary applications before launching Tarkov. The game can consume 12-16GB during extended play sessions, and Windows memory management becomes aggressive when free RAM drops below 2-3GB. This causes stuttering and can interfere with network packet processing as Windows swaps data to disk storage.

CPU Optimization for Network Performance

Monitor CPU temperature during Tarkov gameplay using HWiNFO64 or similar tools. If your CPU exceeds 80°C, it may thermally throttle, reducing performance and causing stuttering that affects network timing. Clean dust from CPU coolers and consider upgrading cooling solutions if temperatures consistently exceed 75°C during gaming.

Disable CPU parking in Windows by opening Device Manager > Processors and right-clicking each CPU core. Select Properties > Power Management and uncheck “Allow the computer to turn off this device to save power.” CPU parking can cause latency spikes when parked cores need to “wake up” to handle network processing during intensive gameplay moments.

Network Hardware Considerations

Test different ethernet cables if you experience intermittent connection issues. Cat 5e cables can develop internal breaks that cause packet loss without completely losing connection. Use Cat 6 or Cat 6a cables for runs longer than 25 feet, and avoid running network cables parallel to power cables which can cause electromagnetic interference.

Consider upgrading to a gaming-focused router with SQM support if you frequently experience lag during peak internet usage hours. Routers like the ASUS AX86U or Netgear XR700 include gaming optimization features specifically designed to maintain low latency for gaming traffic even when other devices are consuming bandwidth simultaneously.

Troubleshooting Persistent Connection Issues

ISP and Routing Problems

Contact your ISP if you consistently experience high ping to Tarkov servers despite all optimizations. Provide traceroute results showing specific routing hops with high latency, and request routing table updates or peering arrangement improvements. Some ISPs can manually adjust routing for gaming traffic or provide access to gaming-optimized network paths.

Consider switching ISPs if your current provider shows consistently poor routing to game servers. Research ISPs in your area using tools like BattlePing’s ISP database, which shows average gaming performance for different providers. Business internet plans often provide better routing and lower latency than consumer plans, though at higher cost.

Regional Server Performance Variations

Test different server regions during various times of day to identify optimal connection windows. Tarkov servers can become overloaded during peak hours (typically 6-11 PM local time), causing increased ping and connection instability. European players often find better performance connecting to London servers during off-peak hours rather than geographically closer but busier Frankfurt servers.

Monitor server maintenance schedules on Tarkov’s official social media accounts. BSG occasionally performs maintenance on specific server clusters without announcing global downtime. Switching to different regional servers temporarily can provide stable connections while your primary servers are being maintained or experiencing issues.

Frequently Asked Questions

What ping is too high for Escape from Tarkov?

Tarkov automatically kicks players when ping exceeds approximately 150ms, but you should aim for under 80ms for competitive gameplay. Ping between 80-120ms is playable but puts you at a disadvantage in firefights. Above 120ms, you risk frequent disconnections and severe desync issues that make the game nearly unplayable.

Why does Tarkov kick me for high ping when my internet is fast?

Internet speed (bandwidth) and ping (latency) are different measurements. You can have 1000Mbps download speed but still have 200ms ping if your data is routing through distant servers. Check your server selection in the BSG Launcher and ensure you’re only connecting to geographically close servers with sub-80ms ping readings.

How much RAM does Tarkov need to run without stuttering?

Tarkov requires 32GB of RAM for optimal performance, especially on larger maps like Streets of Tarkov. 16GB is the minimum but will cause stuttering during extended play sessions due to Unity engine memory leaks. 8GB is completely unplayable as the game alone can consume 12-16GB during normal operation.

Can using a VPN improve my Tarkov ping?

Traditional VPNs typically increase ping by routing your traffic through additional servers, but game-specific network optimization tools can improve routing by connecting you directly to better network paths. However, Tarkov’s BattlEye anti-cheat may flag traditional VPN connections as suspicious, potentially resulting in temporary or permanent bans.

Why do I get kicked for high ping only on certain Tarkov maps?

Different maps have varying network requirements – Streets of Tarkov is the most demanding and can cause ping spikes on connections that work fine for simpler maps like Factory or Labs. Larger maps require more data transmission for player positions, loot states, and environmental interactions, pushing marginal connections over the kick threshold.